
€43.84 tax excl.
Veratron A2C59512454
The ViewLine operating hours counter makes it easy to stick to an effective maintenance schedule. It is only activated when the engine is running so only genuine engine operating hours are counted.
Installation (Hole) diameter and Outside diameter: | 52 mm - 2 1/16 Inch and 59 mm - 2 1/3 Inch |
Installation depth: | 50 mm |
Locking height with Spinlock nut: | 0.5 mm - 20 mm |
Locking height with bracket: | 2 mm - 15 mm (Optional) |
Flushmount: | Optional kit A2C59510864 |
EHC Measurement range: | 0 - 99999.9 Hours |
Signal Input: | Plus ignition switch |
Accuracy: | ± 5 sec/d (At 14V DC - 23°C - NL45) |
Connection: | Hirschmann 8 pins MQS connector |
Operating voltage: | 9 to 30 V DC |
Current consumption: | < 140 mA including warning LED |
Reverse polarity protection: | Yes - 5 Minutes |
Short circuit protection: | Not specified by Veratron |
Dial: | 6 Digits |
Dial colour: | White |
Dial Illumination: | Amber LED backlight 605nm |
Digits: | Red LED backlight |
Warning LED: | Red (632nm) |
Programming: | Veratron USB software kit |
Model: | Veratron ViewLine Marine |
Lens: | Dual - Anti-glare - Anti-Fog |
Standard bezel: | Round white (Interchangeable) |
Front protection class: | IP67 (IEC 60529) |
Rear protection class: | IP52 |
Relative humidity: | Maximum 95% |
Operating temperature: | -30°C to +80°C (Plastic bezel) |
CE standard: | Yes |
DNV GL Certification: | Yes |
Mechanical shock continuous: | 25G - 6ms - 1Hz |
Mechanical single shock | 100G - 11ms |
Free fall test: | 1 Meter - 3x |
Housing flame retarding: | UL94-VD |
Data sheet
You might also like