Veratron A2C59514265
| Installation (Hole) diameter and Outside diameter: | 110 mm - 4 3/8 Inch and 126 mm - 5 Inch |
| Installation depth: | 50 mm |
| Locking height with Spinlock nut: | 0.5 mm - 20 mm |
| Locking height with bracket: | 2 mm - 15 mm (Optional) |
| Flushmount: | Optional kit A2C59510864 |
| #1 Coolant temperature range: | +40°C to +120°C |
| #2 Voltmeter measurement range: | 8 to 16V DC |
| #3 Fuel level range: | E -1/2 - F |
| #4 Engine oil pressure range: | 0 to 5 Bar |
| Sensor signal Coolant temperature: | Veratron NTC Thermistor 287.4-22.7 Ohm |
| Signal input Voltmeter | 8 to 16V DC |
| Signal input fuel level gauge: | Veratron Lever arm sender 3 - 180 Ohm EU |
| Signal input Engine oil pressure: | Veratron Pressure sender 10 tot 184 Ohm |
| Accuracy: | < 3.6° of full scale reading |
| Connection: | Hirschmann 8 & 14 pins MQS connector |
| Operating voltage: | 10 to 16 Volt DC |
| Current consumption: | < 175 mA including warning LED's |
| Reverse polarity protection: | Yes - 5 Minutes |
| Short circuit protection: | Yes - 1 Minute |
| Deflection angle: | 4 x 90° |
| Dial colour: | Black |
| Dial Illumination: | Amber LED backlight 605nm |
| Pointer: | White LED backlight |
| Warning LED: | Red (632nm) |
| Programming: | Veratron USB software kit |
| Model: | Veratron ViewLine Marine |
| Lens: | Dual - Anti-glare - Anti-Fog |
| Standard bezel: | Triangular chrome (Interchangeable) |
| Front protection class: | IP67 (IEC 60529) |
| Rear protection class: | IP52 |
| Relative humidity: | Maximum 95% |
| Operating temperature: | -30°C to +70°C (Chrome bezel) |
| CE standard: | Yes |
| DNV GL Certification: | Yes |
| Mechanical shock continuous: | 25G - 6ms - 1Hz |
| Mechanical single shock | 100G - 11ms |
| Free fall test: | 1 Meter - 3x |
| Housing flame retarding: | UL94-VD |
Data sheet
Specific References