 
        
          
                    
                    
                  
                
               
        
           
          €386.53 (VAT Excl.)
VDO 437-015-009G
| Installation (Hole) diameter and Outside diameter: | 100 mm - 4 Inch en 105 mm - 4 1/8 Inch | 
| Installation depth: | 91 mm | 
| Locking height with Spinlock nut: | Optional 0.5 mm - 23 mm | 
| Locking height with bracket: | 0.5 mm - 12 mm | 
| Flushmount: | None | 
| Analog speed range: | 0 to 220 Mph | 
| Display functionality: | Odometer Trip counter | 
| Sensor signal analog speedo gauge: | RPM Inductive sensor RPM Hall sensor RPM Blockingoscillator sensor | 
| Accuracy: | Not specified by VDO | 
| Connection: | 8-Pole AMP Male blade connector 6,3 x 0,8mm | 
| Illumination connection: | AMP Male blade connector 6,3 x 0,8mm (4x) | 
| Operating voltage: | 11 - 30 Volt DC | 
| Current consumption without illumination: | < 100 mA | 
| Reverse polarity protection: | Yes | 
| Short circuit protection: | Not specified by VDO | 
| Deflection angle: | 320° | 
| Dial colour: | Black | 
| Dial Illumination: | Backlight Double 12V - 2 Watt White - Green - Red and 24V - 2 Watt - Optional | 
| Pointer: | Red backlight | 
| Warning indication: | None | 
| Programming: | None | 
| Model: | Cockpit Vision | 
| Lens: | Single - Anti-glare | 
| Standard bezel: | Triangular black (Threaded ring) | 
| Front protection class: | IP64 (DIN 40050) - Ozon proof - UV proof | 
| Rear protection class: | IP42 (DIN 40050) | 
| Relative humidity: | Not specified by VDO | 
| Operating temperature: | -20°C to +70°C | 
| CE standard: | Yes | 
| DNV GL Certification: | Not specified by VDO | 
| Mechanical shock 8 hours: | Max: 1G - 25Hz - 2000Hz | 
| EMC test: | According to EN 13309 and ISO 13766 | 
| Nominal position: | NL 0 to NL 90 - DIN 16257 | 
| Housing: | Plastic flame retardant | 
Data sheet
Specific References