Tacho synchronizer gauges: A2C59512403 VDO
  • Tacho synchronizer gauges: A2C59512403 VDO
  • Tacho synchronizer gauges: A2C59512403 VDO
  • Tacho synchronizer gauges: A2C59512403 VDO

Veratron ViewLine - 85mm White Synchronizer Indicator - 12-24V DLRW

€91.06 (tax incl.)

€75.26 (VAT Excl.)


Veratron A2C59512403

  • Colour: White
  • Panel hole diameter: 85 mm - 3 3/8"
  • Range: 0 to ± 500 RPM
  • Lens: Dual - Anti-Fog
  • Retail package 1 Synchronizer
descriptionBekijk documentatie
Logistical information:
  • HS Code: 90291010
  • Ean Code: 7640178722262
  • Weight: 0.53kg

Description ViewLine Standard tachometer:

Veratron ViewLine A2C59512403 Full technical specifications:

Sizes and mounting:

Installation (Hole) diameter and Outside diameter:85 mm - 3 3/8 Inch and 93 mm - 3 2/3 Inch
Installation depth:50 mm
Locking height with Spinlock nut:0.5 mm - 20 mm
Locking height with bracket:2 mm - 15 mm (Optional)
Flushmount:Optional kit A2C59510864


RPM synchro measurement range:0 to ± 500 RPM
Sensor signal input tachometer:Alternator terminal: W
Ignition terminal: 1
Outboard engine: Lightning coil
Accuracy:± 2.5% of full scale reading
Connection:Hirschmann 8 pins MQS connector

Power supply:

Operating voltage:8 to 32 V DC
Current consumption:< 175 mA including warning LED
Reverse polarity protection:Yes - 1 Minutes
Short circuit protection:Yes - 1 Minute

Dial & Pointer:

Deflection angle:± 120°
Dial colour:White
Dial Illumination:Amber LED backlight 605nm
Pointer:Red LED backlight
Warning LED: Red (632nm)
Programming:Veratron USB software kit


Model:Veratron ViewLine Marine
Lens:Dual - Anti-glare - Anti-Fog
Standard bezel:Round white (Interchangeable)

Protection and standards:

Front protection class:IP67 (IEC 60529)
Rear protection class:IP52
Relative humidity:Maximum 95%
Operating temperature:-30°C to +80°C (Plastic bezel)
CE standard:Yes
DNV GL Certification:Yes
Mechanical shock continuous:25G - 6ms - 1Hz
Mechanical single shock 100G - 11ms
Free fall test:1 Meter - 3x
Housing flame retarding:UL94-VD

Retail package:

  • Veratron ViewLine White A2C59512403 Toerensynchro Indicator
  • Spinlock nut
  • Bezel round white (Interchangeable)
  • Adapter cable with 8 pins Hirschmann MQS connector
  • Rubber seal
  • QR code
  • Safety instructions and installation manual
  • Veratron RPM sender not included
Veratron VDO

Data sheet

Tacho Measurement range
0 - 500 RPM
Warning light
Red LED Via plus and min
Operating voltage
8 - 32 Volt DC
VDO Instrument retail
VDO Engine monitoring
Signal analogue
Tacho impulse signal
Veratron ViewLine Retail
Plastic double anti-fog
IP Class front
IP67 (IEC 60529)
Installation dimension
85 mm - 3 3/8 Inch
Tacho ​​synchronization
Bezel Interchangeable
Yes - Clip-on
Bezel model
White round
Tacho synchronizer gauges
Article status
Due to Covid19, the delivery time may be longer than usual.