VDO ViewLine Tachometer 6.000 RPM Black 52mm
  • VDO ViewLine Tachometer 6.000 RPM Black 52mm
  • VDO ViewLine Tachometer 6.000 RPM Black 52mm
  • VDO ViewLine Tachometer 6.000 RPM Black 52mm

VDO ViewLine Tachometer 6.000 RPM Black 52mm

VDO A2C59512323
  • Colour: Black
  • Panel hole diameter: 52 mm - 2 1/16"
  • Range: 0 to 6.000 RPM
  • Lens: Single
  • Retail package 1 Tachometer
descriptionBekijk documentatie
Logistical information:
  • HS Code: 90292031
  • Weight: 0.50kg
Discontinued article
Replacement article on request

Description ViewLine Standard tachometer:

VDO ViewLine A2C59512323 Full technical specifications:

Sizes and mounting:

Installation (Hole) diameter and Outside diameter:52 mm - 2 1/16 Inch and 59 mm - 2 1/3 Inch
Installation depth:50 mm
Locking height with Spinlock nut:0.5 mm - 20 mm
Locking height with bracket:2 mm - 15 mm (Optional)
Flushmount:Optional kit A2C59510864


Analog RPM measurement range:0 to 6.000 RPM
Sensor signal input tachometer:Alternator terminal: W
Ignition terminal: 1
Outboard engine: Lightning coil
Accuracy:± 2.5% of full scale reading
Connection:Hirschmann 8 pins MQS connector

Power supply:

Operating voltage:8 to 32 V DC
Current consumption:< 175 mA including warning LED
Reverse polarity protection:Yes - 1 Minutes
Short circuit protection:Yes - 1 Minute

Dial & Pointer:

Deflection angle:240°
Dial colour:Black
Dial Illumination:Amber LED backlight 605nm
Pointer:White LED backlight
Warning LED: Red (632nm)
Programming:VDO USB software kit


Model:VDO ViewLine Standard
Lens:Single - Anti-glare
Standard bezel:Triangular black (Interchangeable)

Protection and standards:

Front protection class:IP67 (IEC 60529)
Rear protection class:IP52
Relative humidity:Maximum 95%
Operating temperature:-30°C to +80°C (Plastic bezel)
CE standard:Yes
DNV GL Certification:Yes
Mechanical shock continuous:25G - 6ms - 1Hz
Mechanical single shock 100G - 11ms
Free fall test:1 Meter - 3x
Housing flame retarding:UL94-VD

Retail package:

  • VDO ViewLine Black A2C59512323 Standard Tachometer
  • Spinlock nut
  • Bezel triangle black (Interchangeable)
  • Adapter cable with 8 pins Hirschmann MQS connector
  • Rubber seal
  • QR code
  • Safety instructions and installation manual
  • VDO RPM sender not included

Data sheet

Warning light
Red LED Via plus and min
Operating voltage
8 - 32 Volt DC
VDO Instrument retail
VDO Engine monitoring
Signal analogue
Tacho impulse signal
Veratron ViewLine Retail
Measurement range
0 - 6.000 RPM
Plastic double anti-fog
IP Class front
IP67 (IEC 60529)
Installation dimension
52 mm - 2 1/16 Inch
Tachometers standard
Bezel Interchangeable
Yes - Clip-on
Bezel model
Black triangle
Article status
Discontinued product