Temperature gauges: A2C59514234 VDO
  • Temperature gauges: A2C59514234 VDO
  • Temperature gauges: A2C59514234 VDO
  • Temperature gauges: A2C59514234 VDO

Veratron ViewLine Engine Oil Temperature 300°F White 52mm

Veratron A2C59514234
  • Colour: White
  • Panel hole diameter: 52 mm - 2 1/16"
  • Range: +120°F to +300°F
  • Lens: Dual - Anti-Fog
  • Retail package 1 Temperature gauge
descriptionBekijk documentatie
Logistical information:
  • HS Code: 90259000
  • Ean Code: 7640178723252
  • Weight: 0.45kg
Discontinued article
Replacement article on request

Description ViewLine Motor oil temperature gauge:

Veratron ViewLine A2C59514234 Full technical specifications:

Sizes and mounting:

Installation (Hole) diameter and Outside diameter:52 mm - 2 1/16 Inch and 59 mm - 2 1/3 Inch
Installation depth:50 mm
Locking height with Spinlock nut:0.5 mm - 20 mm
Locking height with bracket:2 mm - 15 mm (Optional)
Flushmount:Optional kit A2C59510864


Motor Öltemperatur upper scale range:+120°F to +300°F
Motor oil temperature under scale range:+50°C to +150°C
Sensor signal input motor oil temperature gauge:Veratron NTC Thermistor 322.8-18.6 Ohm
Accuracy:< 3.6 angular degrees
Connection:Hirschmann 8 pins MQS connector

Power supply:

Operating voltage:10 to 32 Volt DC
Current consumption:< 140 mA including warning LED
Reverse polarity protection:Yes - 5 Minutes
Short circuit protection:Yes - 1 Minute

Dial & Pointer:

Deflection angle:90°
Dial colour:White
Dial Illumination:Amber LED backlight 605nm
Pointer:Red LED backlight
Warning LED: Red (632nm)
Programming:Veratron USB software kit


Model:Veratron ViewLine Marine
Lens:Dual - Anti-glare - Anti-Fog
Standard bezel:Round white (Interchangeable)

Protection and standards:

Front protection class:IP67 (IEC 60529)
Rear protection class:IP52
Relative humidity:Maximum 95%
Operating temperature:-30°C to +80°C (Plastic bezel)
CE standard:Yes
DNV GL Certification:Yes
Mechanical shock continuous:25G - 6ms - 1Hz
Mechanical single shock 100G - 11ms
Free fall test:1 Meter - 3x
Housing flame retarding:UL94-VD

Retail package:

  • Veratron ViewLine White A2C59514234 Engine oil temperature gauge
  • Spinlock nut
  • Bezel round white (Interchangeable)
  • Adapter cable with 8 pole MQS connector
  • Rubber seal
  • QR code
  • Safety instructions and installation manual
  • Veratron Motor oil temperature sender not included
Veratron VDO

Data sheet

Temperature Measurement range
120°F - 300°F
Warning light
Red LED Via plus and min
Operating voltage
8 - 32 Volt DC
VDO Instrument retail
VDO Engine monitoring
Signal analogue
322.8 - 18.6 Ohm
Veratron ViewLine Retail
Dial scale
Plastic double anti-fog
IP Class front
IP67 (IEC 60529)
Installation dimension
52 mm - 2 1/16 Inch
Engine oil temperature
Bezel Interchangeable
Yes - Clip-on
Bezel model
White round
Temperature gauges
Article status
Discontinued product