Temperature gauges: A2C59512318 VDO
  • Temperature gauges: A2C59512318 VDO
  • Temperature gauges: A2C59512318 VDO
  • Temperature gauges: A2C59512318 VDO

Veratron ViewLine Outside Temperature 50°C Black 52mm


Veratron A2C59512318

  • Colour: Black
  • Panel hole diameter: 52 mm - 2 1/16"
  • Range: -25°C to +50°C
  • Lens: Single
  • Retail package 1 Temperature gauge
descriptionBekijk documentatie
Logistical information:
  • HS Code: 90259000
  • Weight: 0.50kg
Discontinued article
Replacement article on request

Description ViewLine Outside temperature gauge:

Veratron ViewLine A2C59512318 Full technical specifications:

Sizes and mounting:

Installation (Hole) diameter and Outside diameter: 52 mm - 2 1/16 Inch and 59 mm - 2 1/3 Inch
Installation depth: 50 mm
Locking height with Spinlock nut: 0.5 mm - 20 mm
Locking height with bracket: 2 mm - 15 mm (Optional)
Flushmount: Optional kit A2C59510864


Outside temperature range: -25°C to +50°C
Sensor signal input outside temperature gauge: Veratron NTC Thermistor 2.000 Ohm
Accuracy: < 2.5 % of the full scale reading
Connection: Hirschmann 8 pins MQS connector

Power supply:

Operating voltage: 8 to 32 Volt DC
Current consumption: < 140 mA including warning LED
Reverse polarity protection: Yes - 5 Minutes
Short circuit protection: Yes - 1 Minute

Dial & Pointer:

Deflection angle: 240°
Dial colour: Black
Dial Illumination: Amber LED backlight 605nm
Pointer: White LED backlight
Warning LED: Red (632nm)
Programming: Veratron USB software kit


Model: Veratron ViewLine Standard
Lens: Single - Anti-glare
Standard bezel: Triangular black (Interchangeable)

Protection and standards:

Front protection class: IP67 (IEC 60529)
Rear protection class: IP52
Relative humidity: Maximum 95%
Operating temperature: -30°C to +80°C (Plastic bezel)
CE standard: Yes
DNV GL Certification: Yes
Mechanical shock continuous: 25G - 6ms - 1Hz
Mechanical single shock 100G - 11ms
Free fall test: 1 Meter - 3x
Housing flame retarding: UL94-VD

Retail package:

  • Veratron ViewLine Black A2C59512318 Outside temperature gauge
  • Spinlock nut
  • Bezel triangular black (Interchangeable)
  • Adapter cable with 8 pole MQS connector
  • Rubber seal
  • QR code
  • Safety instructions and installation manual
  • Veratron Air temperature sender not included

Data sheet

Warning light
Red LED Via plus and min
Operating voltage
8 - 32 Volt DC
VDO Instrument retail
VDO Engine monitoring
Signal analogue
0°C is 1.892 ± 102 Ohm
Veratron ViewLine Retail
Dial scale
Plastic single nonreflective
IP Class front
IP67 (IEC 60529)
Installation dimension
52 mm - 2 1/16 Inch
Outside temperature
Bezel Interchangeable
Yes - Clip-on
Bezel model
Black triangle
Temperature gauges
Article status
Discontinued product