Temperature gauges: A2C59514235 VDO
  • Temperature gauges: A2C59514235 VDO
  • Temperature gauges: A2C59514235 VDO
  • Temperature gauges: A2C59514235 VDO

VDO ViewLine Engine Oil Temperature 300°F White 52mm

VDO A2C59514235
  • Colour: White
  • Panel hole diameter: 52 mm - 2 1/16"
  • Range: +120°F to +300°F
  • Lens: Dual - Anti-Fog
  • Retail package 1 Temperature gauge
    descriptionBekijk documentatie
    Logistical information:
    • Weight: 0.50kg
    Discontinued article
    Replacement article on request

    Description ViewLine Motor oil temperature gauge:

    VDO ViewLine A2C59514235 Full technical specifications:

    Sizes and mounting:

    Installation (Hole) diameter and Outside diameter:52 mm - 2 1/16 Inch and 59 mm - 2 1/3 Inch
    Installation depth:50 mm
    Locking height with Spinlock nut:0.5 mm - 20 mm
    Locking height with bracket:2 mm - 15 mm (Optional)
    Flushmount:Optional kit A2C59510864


    Motor Öltemperatur upper scale range:+120°F to +300°F
    Motor oil temperature under scale range:+50°C to +150°C
    Sensor signal input motor oil temperature gauge:VDO NTC Thermistor 322.8-18.6 Ohm
    Accuracy:< 3.6 angular degrees
    Connection:Hirschmann 8 pins MQS connector

    Power supply:

    Operating voltage:10 to 32 Volt DC
    Current consumption:< 140 mA including warning LED
    Reverse polarity protection:Yes - 5 Minutes
    Short circuit protection:Yes - 1 Minute

    Dial & Pointer:

    Deflection angle:90°
    Dial colour:White
    Dial Illumination:Amber LED backlight 605nm
    Pointer:Red LED backlight
    Warning LED: Red (632nm)
    Programming:VDO USB software kit


    Model:VDO ViewLine Marine
    Lens:Dual - Anti-glare - Anti-Fog
    Standard bezel:Round white (Interchangeable)

    Protection and standards:

    Front protection class:IP67 (IEC 60529)
    Rear protection class:IP52
    Relative humidity:Maximum 95%
    Operating temperature:-30°C to +80°C (Plastic bezel)
    CE standard:Yes
    DNV GL Certification:Yes
    Mechanical shock continuous:25G - 6ms - 1Hz
    Mechanical single shock 100G - 11ms
    Free fall test:1 Meter - 3x
    Housing flame retarding:UL94-VD

    Retail package:

    • VDO ViewLine White A2C59514235 Engine oil temperature gauge
    • Spinlock nut
    • Bezel round white (Interchangeable)
    • Adapter cable with 8 pole MQS connector
    • Rubber seal
    • QR code
    • Safety instructions and installation manual
    • VDO Motor oil temperature sender not included

    Data sheet

    Temperature Measurement range
    120°F - 300°F
    Warning light
    Red LED Via plus and min
    Operating voltage
    8 - 32 Volt DC
    VDO Instrument retail
    VDO Engine monitoring
    Signal analogue
    322.8 - 18.6 Ohm
    Veratron ViewLine Retail
    Dial scale
    Plastic double anti-fog
    IP Class front
    IP67 (IEC 60529)
    Installation dimension
    52 mm - 2 1/16 Inch
    Engine oil temperature
    Bezel Interchangeable
    Yes - Clip-on
    Bezel model
    White round
    Temperature gauges
    Article status
    Discontinued product