
€57.31 tax excl.
Veratron A2C59514180
Installation (Hole) diameter and Outside diameter: | 52 mm - 2 1/16 Inch and 59 mm - 2 1/3 Inch |
Installation depth: | 50 mm |
Locking height with Spinlock nut: | 0.5 mm - 20 mm |
Locking height with bracket: | 2 mm - 15 mm (Optional) |
Flushmount: | Optional kit A2C59510864 |
Trim position: | Up - Down |
Sensor signal Trim gauge: | 167 - 10 Ohm |
Accuracy: | < 3.6° of full scale reading |
Connection: | Hirschmann 8 pins MQS connector |
Operating voltage: | 8 to 32 Volt DC |
Current consumption: | < 140 mA including warning LED |
Reverse polarity protection: | Yes - 5 Minutes |
Short circuit protection: | Yes - 1 Minute |
Deflection angle: | 90° |
Dial colour: | Black |
Dial Illumination: | Amber LED backlight 605nm |
Pointer: | White LED backlight |
Warning LED: | Red (632nm) |
Programming: | Veratron USB software kit |
Model: | Veratron ViewLine Marine |
Lens: | Dual - Anti-glare - Anti-Fog |
Standard bezel: | Round black (Interchangeable) |
Front protection class: | IP67 (IEC 60529) |
Rear protection class: | IP52 |
Relative humidity: | Maximum 95% |
Operating temperature: | -30°C to +80°C (Plastic bezel) |
CE standard: | Yes |
DNV GL Certification: | Yes |
Mechanical shock continuous: | 25G - 6ms - 1Hz |
Mechanical single shock | 100G - 11ms |
Free fall test: | 1 Meter - 3x |
Housing flame retarding: | UL94-VD |
Data sheet