 
        
          
                    
                    
                  
                
               
        
           
          Veratron A2C59506154
| Installation (Hole) diameter and Outside diameter: | 52 mm - 2 1/16 Inch and 59 mm - 2 1/3 Inch | 
| Installation depth: | 50 mm | 
| Locking height with Spinlock nut: | 0.5 mm - 20 mm | 
| Locking height with bracket: | 2 mm - 15 mm (Optional) | 
| Flushmount: | Optional kit A2C59510864 | 
| Input: | 6 Normally open contact ground &+12V | 
| Led WL1 Green: | ISO Symbol Low beam | 
| Led WL2 Blue: | ISO Symbol High beam | 
| Led WL3 Amber: | ISO Symbol Rear fog light | 
| Led WL4 Red: | ISO Symbol Hand brake | 
| Led WL5 Green: | ISO Symbol Flasher light | 
| Led WL6 Red: | ISO Symbol Hazard lights | 
| Compatible sensors: | Veratron Pressure switches Veratron Temperature switches Universal normally open switches | 
| Connection: | Hirschmann 8 pins MQS connector | 
| Operating voltage: | 8 to 16 Volt | 
| Current consumption: | 20mA per warning LED | 
| Reverse polarity protection: | Not specified by Veratron | 
| Short circuit protection: | Not specified by Veratron | 
Dial colour:BlackDial Illumination:Amber LED backlight 605nm
| Model: | Veratron ViewLine Standard | 
| Lens: | Dual - Anti-glare - Anti-Fog | 
| Standard bezel: | Triangular chrome (Interchangeable) | 
| Front protection class: | IP67 (IEC 60529) | 
| Rear protection class: | IP52 | 
| Relative humidity: | Maximum 95% | 
| Operating temperature: | -30°C to +80°C (Plastic bezel) | 
| CE standard: | Yes | 
| DNV GL Certification: | Yes | 
| Mechanical shock continuous: | 25G - 6ms - 1Hz | 
| Mechanical single shock | 100G - 11ms | 
| Free fall test: | 1 Meter - 3x | 
| Housing flame retarding: | UL94-VD | 
Data sheet
Specific References