VDO Pressure sender 0-5 Bar - M12 x 1.25
Part-number:
VDO 360-081-029-099C
- Pressure range: 0 to 5 Bar
- Thread: M12 x 1.25
- Sender resistance range: 10 - 184 Ohm
- Sensor signal: 1-pole common ground
- No warning contact
Logistical information:
- HS Code: 90269000
- Weight: 0.50kg
Description engine oil pressure sender:
VDO 360 081 029 085C Full technical specifications:
Mechanical features:
Pressure measuring range: | 0 - 5 Bar 0 - 72.5 PSI 0 - 500 KPa |
Maximum pressure: | 30 Bar during 2 seconds |
Thread: | M12 x 1.25 |
Length thread + nut (L1): | 19.5 mm |
Thread length (L2): | 10 mm |
Torque: | 40 Nm |
Operating temperature: | -25 °C to +100 °C |
Pressure medium: | Oil - Fuel - Air |
Electrical features:
Operating voltage: | 6 - 24 V DC |
Resistor range: | 10 - 184 Ohm |
Pressure sensor signal: | Single-Pole common ground |
Warning contact: | None |
Optional warning contact: | VDO A2C59510886 Makepoint Switch |
Pressure sender connector: | M4 Plastic knurled nut |
Datasheets and Tables:
VDO 2014 Vehicle Electronics Catalog: | Page 121 - 122 |
Type of connection: | A |
VDO En Du Pressure senders Tables: | VDO Datasheet table 3 |
Retail package:
- VDO 360 081 029 099C Pressure sender
- VDO Sensors are - unless otherwise noted - delivered without connecting material
360-081-029-099C
Data sheet
- Pressure Measurement range
- 0 - 5 Bar
- Warning contact
- None
- Operating voltage
- 6 - 24 Volt DC
- Packaging
- VDO Sensor retail package
- Application
- VDO Engine monitoring
- Signal analogue
- 10 - 184 Ohm
- Sensor signal
- Common ground
- Thread
- M12 x 1.25 Male
- Functionality
- Engine oil pressure
- Connector type
- M4 Kunststof kartelmoer
- Communication
- Analog
- Category
- Pressure senders
- Article status
- Discontinued product
- Alternative notation
- 360 081 029 099C
360/81/29/99C