Veratron A2C59506156
| Installation (Hole) diameter and Outside diameter: | 52 mm - 2 1/16 Inch and 59 mm - 2 1/3 Inch |
| Installation depth: | 50 mm |
| Locking height with Spinlock nut: | 0.5 mm - 20 mm |
| Locking height with bracket: | 2 mm - 15 mm (Optional) |
| Flushmount: | Optional kit A2C59510864 |
| Input: | 6 Normally open contact ground |
| Led WL1 Amber: | ISO Symbol Fuel level |
| Led WL2 Red: | ISO Symbol Coolant temperature |
| Led WL3 Red: | ISO Symbol Battery voltage |
| Led WL4 Red: | ISO Symbol Oil pressure |
| Led WL5 Red: | ISO Symbol Oil temperature |
| Led WL6 Amber: | ISO Symbol Preheating |
| Compatible sensors: | Veratron Pressure switches Veratron Temperature switches Universal normally open switches |
| Connection: | Hirschmann 8 pins MQS connector |
| Operating voltage: | 8 to 16 Volt |
| Current consumption: | 20mA per warning LED |
| Reverse polarity protection: | Not specified by Veratron |
| Short circuit protection: | Not specified by Veratron |
Dial colour:WhiteDial Illumination:Amber LED backlight 605nm
| Model: | Veratron ViewLine Marine |
| Lens: | Dual - Anti-glare - Anti-Fog |
| Standard bezel: | Round white (Interchangeable) |
| Front protection class: | IP67 (IEC 60529) |
| Rear protection class: | IP52 |
| Relative humidity: | Maximum 95% |
| Operating temperature: | -30°C to +80°C (Plastic bezel) |
| CE standard: | Yes |
| DNV GL Certification: | Yes |
| Mechanical shock continuous: | 25G - 6ms - 1Hz |
| Mechanical single shock | 100G - 11ms |
| Free fall test: | 1 Meter - 3x |
| Housing flame retarding: | UL94-VD |
Data sheet
Specific References