Continental VDO E-Gas Compact AGB Komfort 12 Volt
Part-number:
408-403-002-001C
- E-Gas II Electronic Actuator
- 12 volt
Logistical information:
- HS Code: 84818059
- Weight: 1.00kg
Description:
This electrical actuator was designed by VDO for the purpose of operating a diesel engine fuel-injection pump lever in conjunction with a VDO electronic con- troller. A pulse-width modulated (PWM) signal is used to control the permanent magnet DC motor.
Construction:
Watertight cast aluminum housing with PTFE membrane for pressure equaliza- tion. Three-stage transmission transfers force from the DC motor to the output shaft via an electromagnetic clutch. A conductive plastic potentiometer provides feedback. Connecting cable with connector.
Technical data:
| Rated voltage | 12 V |
| Rated torque |
400 Ncm counterclockwise (AGB) 300 Ncm clockwise (tempostat®) |
| Closed-to-open stroke time | ≤ 2 s |
| Insulation resistance | ≥ 500 kΩ |
| Dielectric strength | 500 V |
| Operating temperature | -25 °C to +90 °C |
| Protection rating | IP56 DIN 40050 Part 9 |
|
Max. tightening torque for drive shaft |
10 Nm |
|
Max. tightening torque for fastening screws |
12Nm (at 9 mm screw-in depth) |
| Mechanical angle | 103° ± 5° |
| Connector | ITT Canon Sure Seal, 7-pin |
408-403-002-001C
Data sheet
- Article status
- Discontinued product
408-403-002-001C
- E-Gas II Electronic Actuator
- 12 volt