VDO Pressure sender 0-5 Bar - M18
Part-number:
VDO 360-081-029-025K
- Pressure range: 0 to 5 Bar
- Thread: M18 x 1.5
- Sender resistance range: 10 - 184 Ohm
- Sensor signal: 1-pole common ground
- Replacing product on request
Logistical information:
- Weight: 0.50kg
Description engine oil pressure sender:
VDO 360 081 029 025K Full technical specifications:
Mechanical features:
| Pressure measuring range: | 0 - 5 Bar 0 - 72.5 PSI 0 - 500 KPa |
| Maximum pressure: | 30 Bar during 2 seconds |
| Thread: | M18 x 1.5 |
| Length thread + nut (L1): | 20.5 mm |
| Thread length (L2): | 12 mm |
| Torque: | 100 Nm |
| Operating temperature: | -25 °C to +100 °C |
| Pressure medium: | Oil - Fuel - Air |
Electrical features:
| Operating voltage: | 6 - 24 V DC |
| Resistor range: | 10 - 184 Ohm |
| Pressure sensor signal: | Single-Pole common ground |
| Warning contact: | None |
| Optional warning contact: | VDO A2C59510886 Makepoint Switch |
| Pressure sender connector: | M4 Plastic knurled nut |
Datasheets and Tables:
| VDO 2014 Vehicle Electronics Catalog: | Page 121 - 122 |
| Type of connection: | A |
| VDO En Du Pressure senders Tables: | VDO Datasheet table 3 |
Replacing product for:
- VDO 360 081 029 025K Pressure sender
- On request
360-081-029-025K
Data sheet
- Pressure Measurement range
- 0 - 5 Bar
- Warning contact
- None
- Operating voltage
- 6 - 24 Volt DC
- Packaging
- VDO Sensor retail package
- Signal output:
- 10 - 184 Ohm
- Application
- VDO Engine monitoring
- Signal analogue
- 10 - 184 Ohm
- Sensor signal
- Common ground
- Sensor connector
- M4 Plastic knurled nut
- Thread
- M18 x 1.5 Male
- Functionality
- Engine oil pressure
- Connector type
- M4 Kunststof kartelmoer
- Communication
- Analog
- Category
- Pressure senders
- Article status
- Discontinued product
- Alternative notation
- 360 081 029 025K
360/81/29/25K
VDO 360-081-029-025K
- Pressure range: 0 to 5 Bar
- Thread: M18 x 1.5
- Sender resistance range: 10 - 184 Ohm
- Sensor signal: 1-pole common ground
- Replacing product on request