VDO Pressure switch 2.00 Bar - M10
Part-number:
VDO 230-112-004-004C
- Pressure switchpoint: 2.00 Bar ± 0.20 Bar
- Thread: M10 x 1 Tapered short
- Contact close as pressure falls
- Pressure switch: 1-pole common ground
- Switching capacity: 5 Watt Maximum
Logistical information:
- Weight: 0.50kg
Description oil pressure switch:
VDO 230 112 004 004C Full technical specifications:
Mechanical features:
| Pressure switchpoint: | 2.00 Bar ± 0.20 Bar |
| Pressure range: | 0 - 12 Bar |
| Maximum pressure: | 30 Bar during 2 seconds |
| Thread: | M10 x 1 Conical short |
| Length thread + nut (L1): | 26 mm |
| Thread length (L2): | 11 mm |
| Torque: | 30 Nm |
| Operating temperature: | –25 °C to +120°C |
| Housing: | Hex 27 mm - contact chamber vented |
| Pressure medium: | Oil - Fuel - Air |
Electrical features:
| Operating voltage: | 6 - 24 V DC |
| Switch function: | Contact closes when pressure < 2.00 Bar |
| Pressure switch signal: | Single-Pole common ground |
| Contact response: | Slow |
| Pressure switch capacity: | Maximum 5 Watt non-inductive |
| Pressureswitch connector: | AMP Male 6.3 x 0.8 mm 90° |
Datasheets en Tabellen:
| VDO 2014 Vehicle Electronics Catalog: | Page 131 - 132 |
| Type of connection: | Model: 1C7 |
Retail package:
- VDO 230 112 004 004C Pressure switch
- VDO Sensors are - unless otherwise noted - delivered without connecting material
230-112-004-004C
Data sheet
- Operating voltage
- 6 - 24 Volt DC
- Packaging
- VDO Sensor retail package
- Application
- VDO Engine monitoring
- Signal analogue
- Contact closes with falling pressure
- Sensor signal
- Common ground
- Thread
- M10 x 1 Male tapered short
- Switchpoint
- 2.00 Bar
- Category
- Pressure switches
- Article status
- Discontinued product
- Alternative notation
- 230 112 004 004C
230/112/4/4C
VDO 230-112-004-004C
- Pressure switchpoint: 2.00 Bar ± 0.20 Bar
- Thread: M10 x 1 Tapered short
- Contact close as pressure falls
- Pressure switch: 1-pole common ground
- Switching capacity: 5 Watt Maximum