VDO Oil temperature sender 200°C – M10
Part-number:
VDO 323-801-003-002D
- Temperature range: +50°C to +200°C
- Thread: M10 x 1
- Sender resistance range: 482.5 - 14.3 Ohm
- Sensor signal: 1-pole common ground
- Replacing product on request
Logistical information:
- Weight: 0.50kg
Description cylinder temperature sender:
VDO 323 801 003 002D Full technical specifications:
Mechanical features:
Temperature measuring range: | +50°C to +200°C |
Minimum - Maximum operating temperature: | -70 °C to +250 °C |
Thread: | M10 x 1 |
Sender element length + thread (L): | 22 mm |
Sensor diameter: | 7 mm |
Torque: | 10 Nm |
Temperature medium: | Coolant - Water - Air - Engine oil - Transmission oil - Fuel |
Electrical features:
Operating voltage: | 6 - 24 V DC |
Resistor range: | 482.5 - 14.3 Ohm |
Temperature sensor signal: | Single-Pole common ground |
Warning contact: | None |
Optional warning contact: | VDO A2C59510886 Makepoint Switch |
Temperature sender connector: | AMP Male T-model 6.3 x 0.8 mm |
Datasheets and Tables:
VDO 2014 Vehicle Electronics Catalog: | Page 136 - 137 |
Type of connection: | C |
VDO En Du Temperature senders Tables: | VDO table: 12 |
Temperature 100 °C > Resistance: | 100 °C = 148.81 Ohm ± 15.16 Ohm |
Replacing product for:
- VDO 323 801 003 002D Temperature sender
- On request
323-801-003-002D
Data sheet
- Temperature Measurement range
- +50°C to +200°C
- Warning contact
- None
- Operating voltage
- 6 - 24 Volt DC
- Packaging
- VDO Sensor retail package
- Signal output:
- 482.5 - 14.3 Ohm
- Application
- VDO Engine monitoring
- Signal analogue
- 482.5 - 14.3 Ohm
- Sensor signal
- Common ground
- Sensor connector
- AMP Male T-model 6.3 x 0.8 mm
- Thread
- M10 x 1 Male
- Functionality
- Cylinder temperature
- Connector type
- AMP Blade T-model 6.3 x 0.8 mm
- Communication
- Analog
- Category
- Temperature sensors
- Article status
- Discontinued product
- Alternative notation
- 323 801 003 002D
323/801/3/2D